@article{Rienäcker2017b,
title = {Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance},
author = {M Rienäcker and M Bossmeyer and A Merkle and U Römer and F Haase and J Krügener and R Brendel and R Peibst},
doi = {10.1109/JPHOTOV.2016.2614123},
issn = {2156-3381},
year = {2017},
date = {2017-01-01},
journal = {IEEE Journal of Photovoltaics},
volume = {7},
number = {1},
pages = {11-18},
abstract = {We investigate the junction resistivity of high-quality carrier-selective polysilicon on oxide (POLO) junctions with the transfer length method. We demonstrate n+ POLO junctions with a saturation current density JC,poly of 6.2 fA/cm2 and a junction resistivity ρc of 0.6 mΩcm2, counterdoped n+ POLO junctions with 2.7 fA/cm2 and 1.3 mΩcm2, and p+ POLO junctions with 6.7 fA/cm2 and 0.2 mΩcm2. Such low junction resistivities and saturation current densities correspond to excellent selectivities S10 of up to 16.2. The efficiency potential for back-junction back-contact solar cells with these POLO junctions was determined to be larger than 25 % by numerical device simulations. We demonstrate experimentally a back-junction back-contact solar cell with p-type and n-type POLO junctions with an independently confirmed efficiency of 24.25 %.},
keywords = {Aluminum, Back-junction back-contact (BJBC) cells, boron, Conductivity, contact resistivity, Current density, Junctions, Photovoltaic cells, polysilicon, polysilicon on oxide (POLO) junctions, recombination, selective contacts, selectivity},
pubstate = {published},
tppubtype = {article}
}

@article{KRANZ201564,
title = {Determination of the Contact Resistivity of Screen-printed Al Contacts Formed by Laser Contact Opening},
author = {C Kranz and B Lim and U Baumann and T Dullweber},
doi = {10.1016/j.egypro.2015.03.288},
issn = {1876-6102},
year = {2015},
date = {2015-04-13},
journal = {Energy Procedia},
volume = {67},
pages = {64-69},
note = {Proceedings of the Fifth Workshop on Metallization for Crystalline Silicon Solar Cells},
keywords = {contact resistivity, PERC solar cells, screen-printing},
pubstate = {published},
tppubtype = {article}
}

@article{Mader2012,
title = {Local rear contacts to silicon solar cells by in-line high-rate evaporation of aluminum},
author = {C Mader and J Müller and S Eidelloth and R Brendel},
doi = {10.1016/j.solmat.2012.06.047},
year = {2012},
date = {2012-12-01},
journal = {Solar Energy Materials and Solar Cells},
volume = {107},
pages = {272-282},
keywords = {Contact recombination, contact resistivity, In-line evaporation, loss analysis, Rear contact, Silicon solar cell},
pubstate = {published},
tppubtype = {article}
}